Gå till innehåll

snetok

Sergeant
  • Innehålls Antal

    88
  • Gick med

  • Besökte senast

  • Dagar Vunna

    8

snetok senast vann den dag 18 Mars 2019

snetok hade det mest gillade innehållet!

Om snetok

  • Födelsedag 1958-05-12

Profile Information

  • Hemort
    Tallinn

Senaste besökare till profilen

618 profilvisningar

snetok's Achievements

Member

Member (1/1)

149

Anseende bland gemenskapen

  1. The fan motor at least has a 30 amp fuse. This is a very large load for the generator if headlights and other equipment are included. Touch the generator after 10 minutes of fan operation - the hand does not hold. In addition, the battery will be undercharged, worse. IMHO staff design can be the best?
  2. Protected computer Panasonic CF 18, compressor station, chainsaw, included in the sales kit)))
  3. There have been major changes in life. Therefore, I sell such beautiful things. The machine is in perfect condition. The wooden boat was built by the old masters of the island of Saaremaa., Also in perfect condition. Who will be interested in - photos and description of the boat on request. Something about the car can be viewed in my posts on the forum Prices are as follows. If separately, the car is 15,000 euros, the boat is 15,000 euros))). If all together, then 26 000 euros - a discount on delivery on a trailer 4 000 euros. The boat trailer is coastal, therefore a trailer or slow motion on this trailer is required. There are no signal lights on it. Communication Google-translator or in Russian pikk50@mail.ru
  4. All this is beautiful. But IMHO Volvo car should be a Volvo car ...)))
  5. In the summer I will try with a glass of water is interesting .The car will finish balancing, taking into account the gaps of the transmission . This will be more accurate .
  6. Great video, thanks! I would only remove the wheels to eliminate their effect on vibration . I think that I will be able to adjust if necessary . I'm more than 75 km/ h on Volvo do not go )).
  7. OK. I hope there's no vibration.
  8. Once again measured when squeezed in a Vice . Size 81.7 ((.
  9. I measured compression. But the result has not changed . The caps rest against the bearing needles and the size is stable.If you rotate the caps several times and measure again without compression , the size will be close to 82, 4 - 82.3. Only installation in place will solve this question-suitable or not . But I won't do it until may .
  10. Focus did not work . Different people have different hands))).
  11. Over the weekend I will get them. Then I measure myself.
  12. Now you just have to buy and install. Then everything will become clear. Size 82.5 may be due to uncompressed glands. When to install the size will decrease due to the tightness of the locking plates.
  13. If the mountain does not go to Mohammed, then Mohammed goes to the mountain))).
  14. Thank you eile but dear H.Hansen I think I indicated the exact dimensions of the cross. The data as you indicated on the link differ from the sizes indicated. It is clear that size matters))). Can someone measure the spider again very accurately, so as not to make a wrong choice.
  15. The best I found was a size 27x82 . I think that there will be problems with vibration roll. Someone bought Tatanka ? The size of the fits 27'x 82.5 ? Can anyone an alternative solution?
×
×
  • Skapa nytt...