Gå till innehåll

TGB 11 Distributor Type?


jeepboy_90

Rekommendera Poster

There is the normal type identified by normal type cap, spark plug and plug cables and the radio supressed type with special cap, spark plug and plug cables similar to the M-type vehicles.

 

The Pertronix kit for the normal type is easily available (#2863N24). For the radio supressed type I dont know.

 

This is an email I wrote to pertronix some years ago:

 

Hello, I have a Volvo 1976 C303 with Bosch distributor # 0 231 305 058. Its
a 24 volt system.
Will the 2863N24 work for this distributor? And can any of your flamethrower
coils be used together with the Ignitor on a 24 volt system? Thanks in
advance.

------------

Yes, the 2863N24 will work in your distributor. Use coil #40511 and a 3.0
ohm ballast resistor.

Carl Alcocer
Pertonix Inc.
909-273-6007

 

And yes, it did work.
Hope this helps.

 

Edit: Link to old thread.

Länk till kommentar
Dela på andra webbplatser

  • 2 weeks later...

Halfsafe, thanks for the help.

 

I installed the coil and Pertronix, took all of 30 minutes. Just want to make sure that you hooked the red to the positive and black to the ground on the coil from the pertronix module. That still allows the resistor to work properly?

 

I took it out for a test drive and what a difference! 

 

Thanks again.

  • Like 3
Länk till kommentar
Dela på andra webbplatser

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Gäst
Svara i detta ämne...

×   Du har klistrat in innehåll med formatering.   Ta bort formatering

  Endast 75 max uttryckssymboler är tillåtna.

×   Din länk har automatiskt bäddats in.   Visa som länk istället

×   Ditt tidigare innehåll har återställts.   Rensa redigerare

×   Du kan inte klistra in bilder direkt. Ladda upp eller sätt in bilder från URL.

Laddar...
×
×
  • Skapa nytt...