Gå till innehåll

Diff lock valves 12V


tcfengineering

Rekommendera Poster

You need a 3-port 2 position valve. The third port evacuates the diaphragm vacuum when the valve is deenergized.

  • Like 2
Länk till kommentar
Dela på andra webbplatser

 

I don't think so. This one seems to have a hole straight through making it stackable. Still an open-close valve.

 

The one you need has three ports like the schematic symbol below. Your diaphragm connects to port 1, your vacuum to port 2. When the valve opens, it connects 1 and 2. When the valve closes, it evacuates port 1.

 

 

Simbol_53_62.jpg

  • Like 1
Länk till kommentar
Dela på andra webbplatser

This is a servo action valve, it means there is a very small primary valve up at the coil that sends air that moves a shuttle down in the body. This shuttle connects port 1 to port 2 or 3.

 

There is a minimum pressure needed for this to work, copied from the spec of this valve:

Pressure applied: 1.5-8.0Kgf/c㎡ / 21.3-113.8 PSI

Note the minimum pressure 1.5kg!

 

If this will work with vaccuum needs some investigation.

 

EDIT. Removed suggested ebay item. It was not as described by seller.

Redigerad av SBA111
Länk till kommentar
Dela på andra webbplatser

This is a servo action valve, it means there is a very small primary valve up at the coil that sends air that moves a shuttle down in the body. This shuttle connects port 1 to port 2 or 3.

 

There is a minimum pressure needed for this to work, copied from the spec of this valve:

Pressure applied: 1.5-8.0Kgf/c㎡ / 21.3-113.8 PSI

Note the minimum pressure 1.5kg!

 

If this will work with vaccuum needs some investigation.

 

What you want is a direct action valve more like this

 

http://www.ebay.com/itm/Direct-Action-2-Position-3-Way-Pneumatic-Air-Solenoid-Valve-DC-12V-3W-/321062533797?hash=item4ac0d17aa5:m:mqqsOuCURXCwZOdikejMeFg

 

Säker på det? -_-;)

Länk till kommentar
Dela på andra webbplatser

There appear to be some confusion on the valves specifications on ebay. Some valves claimed to be 3-port are in fact stackable 2-port valves. They have 3 ports but are designed to be stacked side by side with sealing O-rings in between (you may note the recessed O-ring seats). That idea is to have a bank of valves with just one incoming pressure port for the entire stack.

 

What you should look for is a true 3-port valve…

 

Hint: If there is a see-through hole in the side port, it's a stacked valve.

  • Like 1
Länk till kommentar
Dela på andra webbplatser

Länk till kommentar
Dela på andra webbplatser

Hyfsat,

tycker du att det är för nåra porthål?

Det är vanligt att avlufta genom "spindelskaftet".

 

Men hundra ska man ju inte vara, du ser nåt som jag missar?

 

Ja, lite märkligt att det är glest mellan dom på ebay, har inte hittat någon. Har några på lager på jobbet som just har tredje porten ovanpå spolen.

 

Nä, inte för få porthål men säljarna på ebay blandar ihop portarnas funktion. Googlade några av artikelnumren på ventiler de påstår är 3/2 men det är hål rakt igenom.

  • Like 1
Länk till kommentar
Dela på andra webbplatser

Ja, lite märkligt att det är glest mellan dom på ebay, har inte hittat någon. Har några på lager på jobbet som just har tredje porten ovanpå spolen.

 

Nä, inte för få porthål men säljarna på ebay blandar ihop portarnas funktion. Googlade några av artikelnumren på ventiler de påstår är 3/2 men det är hål rakt igenom.

Sedärja,

så noga kollade jag inte.

  • Like 1
Länk till kommentar
Dela på andra webbplatser

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Gäst
Svara i detta ämne...

×   Du har klistrat in innehåll med formatering.   Ta bort formatering

  Endast 75 max uttryckssymboler är tillåtna.

×   Din länk har automatiskt bäddats in.   Visa som länk istället

×   Ditt tidigare innehåll har återställts.   Rensa redigerare

×   Du kan inte klistra in bilder direkt. Ladda upp eller sätt in bilder från URL.

Laddar...
×
×
  • Skapa nytt...