tcfengineering Postad 21 Januari , 2017 Rapport Share Postad 21 Januari , 2017 Can anyone help me with some suggestions for a nice 12V valve setup to operate the vacuum for the difflocks on a TGB1314 ? I want to buy something new so that it is reliable. Any help would be greatly appreciated Citera Länk till kommentar Dela på andra webbplatser More sharing options...
snetok Postad 21 Januari , 2017 Rapport Share Postad 21 Januari , 2017 Any firm engaged in the tuning of SUVs has these valves . Alternatively, the valve with compressed gas vehicle equipment . Citera Länk till kommentar Dela på andra webbplatser More sharing options...
tcfengineering Postad 21 Januari , 2017 Författare Rapport Share Postad 21 Januari , 2017 What about this, would this work ? http://www.ebay.co.uk/itm/2-Way-NBR-Electric-Solenoid-Valve-Water-Air-N-O-12V-DC-1-4-Normally-Open-Type-/271888344686?hash=item3f4dcee66e:g:wvEAAOSwbsBXi0PV Citera Länk till kommentar Dela på andra webbplatser More sharing options...
snetok Postad 21 Januari , 2017 Rapport Share Postad 21 Januari , 2017 Fluid temperature: -5 ~ 80 °C ??! Citera Länk till kommentar Dela på andra webbplatser More sharing options...
Wingflyer Postad 21 Januari , 2017 Rapport Share Postad 21 Januari , 2017 What about this, would this work ? http://www.ebay.co.uk/itm/2-Way-NBR-Electric-Solenoid-Valve-Water-Air-N-O-12V-DC-1-4-Normally-Open-Type-/271888344686?hash=item3f4dcee66e:g:wvEAAOSwbsBXi0PV You need a 3-port 2 position valve. The third port evacuates the diaphragm vacuum when the valve is deenergized. 2 Citera Länk till kommentar Dela på andra webbplatser More sharing options...
snetok Postad 22 Januari , 2017 Rapport Share Postad 22 Januari , 2017 EN531-16PN3 Camozzi Citera Länk till kommentar Dela på andra webbplatser More sharing options...
tcfengineering Postad 22 Januari , 2017 Författare Rapport Share Postad 22 Januari , 2017 http://www.ebay.co.uk/itm/3-Way-2-Position-Pneumatic-Solenoid-Valve-PT1-8-Port-AC220V-110V-DC24V-12V-Y5G5-/222273307066?var=&hash=item33c08581ba:m:m-72hgsUgUGCume-mxAI79g What about this one ? Any better ? Thanks Citera Länk till kommentar Dela på andra webbplatser More sharing options...
Wingflyer Postad 22 Januari , 2017 Rapport Share Postad 22 Januari , 2017 http://www.ebay.co.uk/itm/3-Way-2-Position-Pneumatic-Solenoid-Valve-PT1-8-Port-AC220V-110V-DC24V-12V-Y5G5-/222273307066?var=&hash=item33c08581ba:m:m-72hgsUgUGCume-mxAI79g What about this one ? Any better ? Thanks I don't think so. This one seems to have a hole straight through making it stackable. Still an open-close valve. The one you need has three ports like the schematic symbol below. Your diaphragm connects to port 1, your vacuum to port 2. When the valve opens, it connects 1 and 2. When the valve closes, it evacuates port 1. 1 Citera Länk till kommentar Dela på andra webbplatser More sharing options...
tcfengineering Postad 22 Januari , 2017 Författare Rapport Share Postad 22 Januari , 2017 http://www.ebay.co.uk/itm/1-4-DC-12V-3way-2-position-Pneumatic-Electric-Solenoid-Valve-BSP-Air-Aluminum-/121880914346?hash=item1c60ab29aa:g:IiYAAOSwzhVWreBY The schematic on this one looks like the one on your post ? Thanks for your help Citera Länk till kommentar Dela på andra webbplatser More sharing options...
SBA111 Postad 22 Januari , 2017 Rapport Share Postad 22 Januari , 2017 (redigerade) http://www.ebay.co.uk/itm/1-4-DC-12V-3way-2-position-Pneumatic-Electric-Solenoid-Valve-BSP-Air-Aluminum-/121880914346?hash=item1c60ab29aa:g:IiYAAOSwzhVWreBY The schematic on this one looks like the one on your post ? Thanks for your help This is a servo action valve, it means there is a very small primary valve up at the coil that sends air that moves a shuttle down in the body. This shuttle connects port 1 to port 2 or 3. There is a minimum pressure needed for this to work, copied from the spec of this valve: Pressure applied: 1.5-8.0Kgf/c㎡ / 21.3-113.8 PSI Note the minimum pressure 1.5kg! If this will work with vaccuum needs some investigation. EDIT. Removed suggested ebay item. It was not as described by seller. Redigerad 23 Januari , 2017 av SBA111 Citera Länk till kommentar Dela på andra webbplatser More sharing options...
Wingflyer Postad 22 Januari , 2017 Rapport Share Postad 22 Januari , 2017 This is a servo action valve, it means there is a very small primary valve up at the coil that sends air that moves a shuttle down in the body. This shuttle connects port 1 to port 2 or 3. There is a minimum pressure needed for this to work, copied from the spec of this valve: Pressure applied: 1.5-8.0Kgf/c㎡ / 21.3-113.8 PSI Note the minimum pressure 1.5kg! If this will work with vaccuum needs some investigation. What you want is a direct action valve more like this http://www.ebay.com/itm/Direct-Action-2-Position-3-Way-Pneumatic-Air-Solenoid-Valve-DC-12V-3W-/321062533797?hash=item4ac0d17aa5:m:mqqsOuCURXCwZOdikejMeFg Säker på det? Citera Länk till kommentar Dela på andra webbplatser More sharing options...
Wingflyer Postad 22 Januari , 2017 Rapport Share Postad 22 Januari , 2017 There appear to be some confusion on the valves specifications on ebay. Some valves claimed to be 3-port are in fact stackable 2-port valves. They have 3 ports but are designed to be stacked side by side with sealing O-rings in between (you may note the recessed O-ring seats). That idea is to have a bank of valves with just one incoming pressure port for the entire stack. What you should look for is a true 3-port valve… Hint: If there is a see-through hole in the side port, it's a stacked valve. 1 Citera Länk till kommentar Dela på andra webbplatser More sharing options...
Wingflyer Postad 22 Januari , 2017 Rapport Share Postad 22 Januari , 2017 Here is what you are looking for. Direct action, 0-10 bar (actually overkill), and with a pressure port(P), a actuator port(A) and a evacuationport(R ). http://www.ebay.co.uk/itm/3V1-06-DC-12V-2-Position-3-Way-Pneumatic-Solenoid-Valve-FK/231503573790?_trksid=p2047675.c100005.m1851&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D2%26asc%3D40860%26meid%3D10cdeb6da9304fcb956cc3054dc6f148%26pid%3D100005%26rk%3D3%26rkt%3D6%26sd%3D172136219108 2 Citera Länk till kommentar Dela på andra webbplatser More sharing options...
SBA111 Postad 22 Januari , 2017 Rapport Share Postad 22 Januari , 2017 Säker på det? Hyfsat, tycker du att det är för nåra porthål? Det är vanligt att avlufta genom "spindelskaftet". Men hundra ska man ju inte vara, du ser nåt som jag missar? Citera Länk till kommentar Dela på andra webbplatser More sharing options...
Wingflyer Postad 22 Januari , 2017 Rapport Share Postad 22 Januari , 2017 Hyfsat, tycker du att det är för nåra porthål? Det är vanligt att avlufta genom "spindelskaftet". Men hundra ska man ju inte vara, du ser nåt som jag missar? Ja, lite märkligt att det är glest mellan dom på ebay, har inte hittat någon. Har några på lager på jobbet som just har tredje porten ovanpå spolen. Nä, inte för få porthål men säljarna på ebay blandar ihop portarnas funktion. Googlade några av artikelnumren på ventiler de påstår är 3/2 men det är hål rakt igenom. 1 Citera Länk till kommentar Dela på andra webbplatser More sharing options...
SBA111 Postad 23 Januari , 2017 Rapport Share Postad 23 Januari , 2017 Ja, lite märkligt att det är glest mellan dom på ebay, har inte hittat någon. Har några på lager på jobbet som just har tredje porten ovanpå spolen. Nä, inte för få porthål men säljarna på ebay blandar ihop portarnas funktion. Googlade några av artikelnumren på ventiler de påstår är 3/2 men det är hål rakt igenom. Sedärja,så noga kollade jag inte. 1 Citera Länk till kommentar Dela på andra webbplatser More sharing options...
tcfengineering Postad 23 Januari , 2017 Författare Rapport Share Postad 23 Januari , 2017 Thanks for your help. I have ordered the valves, I will update this thread when I fit them with some pictures. 4 Citera Länk till kommentar Dela på andra webbplatser More sharing options...
Rekommendera Poster
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.