Gå till innehåll

Clutch C202


Rekommendera Poster

I know a lot has been siad on this forum about the clutch but i miss the conclusion.

 

what I found:

  1. Borg and beck 9,5" pressure plate (used an a Bedford CF) combined with a LR series 2/3 lamel plate will work >  A bit hard to find, specially the pressure plate.
  2. Volvo 164 pressure plate with a lamel plate (10 splines/228 mm) can work >  Easier to find, but will it work?

 

My question:

anyone used option 2 (the volvo 164 with a 228 mm lamel plate?

 

The original plate is 240 but a 164 has a lot more horse power and I see one person confirming it works (??).

 

 

What are the risks if I use a 164 set (pressure plate, lamel plate and release bearing?

 

Links to previous topics (but I miss the conclusion):

 

Thanks for the help.

 

regards

 

brt

Länk till kommentar
Dela på andra webbplatser

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Gäst
Svara i detta ämne...

×   Du har klistrat in innehåll med formatering.   Ta bort formatering

  Endast 75 max uttryckssymboler är tillåtna.

×   Din länk har automatiskt bäddats in.   Visa som länk istället

×   Ditt tidigare innehåll har återställts.   Rensa redigerare

×   Du kan inte klistra in bilder direkt. Ladda upp eller sätt in bilder från URL.

Laddar...
×
×
  • Skapa nytt...