snetok

The fan motor at least has a 30 amp fuse. This is a very large load for the generator if headlights and other equipment are included. Touch the generator after 10 minutes of fan operation - the hand does not hold. In addition, the battery will be undercharged, worse. IMHO staff design can be the best?

Protected computer Panasonic CF 18, compressor station, chainsaw, included in the sales kit)))

There have been major changes in life. Therefore, I sell such beautiful things. The machine is in perfect condition. The wooden boat was built by the old masters of the island of Saaremaa., Also in perfect condition. Who will be interested in - photos and description of the boat on request. Something about the car can be viewed in my posts on the forum Prices are as follows. If separately, the car is 15,000 euros, the boat is 15,000 euros))). If all together, then 26 000 euros - a discount on delivery on a trailer 4 000 euros. The boat trailer is coastal, therefore a trailer or slow motion on this trailer is required. There are no signal lights on it. Communication Google-translator or in Russian pikk50@mail.ru

All this is beautiful. But IMHO Volvo car should be a Volvo car ...)))

In the summer I will try with a glass of water is interesting .The car will finish balancing, taking into account the gaps of the transmission . This will be more accurate .

Great video, thanks! I would only remove the wheels to eliminate their effect on vibration . I think that I will be able to adjust if necessary . I'm more than 75 km/ h on Volvo do not go )).

OK. I hope there's no vibration.

Once again measured when squeezed in a Vice . Size 81.7 ((.

I measured compression. But the result has not changed . The caps rest against the bearing needles and the size is stable.If you rotate the caps several times and measure again without compression , the size will be close to 82, 4 - 82.3. Only installation in place will solve this question-suitable or not . But I won't do it until may .

Focus did not work . Different people have different hands))).

Over the weekend I will get them. Then I measure myself.

Now you just have to buy and install. Then everything will become clear. Size 82.5 may be due to uncompressed glands. When to install the size will decrease due to the tightness of the locking plates.

If the mountain does not go to Mohammed, then Mohammed goes to the mountain))).

Thank you eile but dear H.Hansen I think I indicated the exact dimensions of the cross. The data as you indicated on the link differ from the sizes indicated. It is clear that size matters))). Can someone measure the spider again very accurately, so as not to make a wrong choice.

The best I found was a size 27x82 . I think that there will be problems with vibration roll. Someone bought Tatanka ? The size of the fits 27'x 82.5 ? Can anyone an alternative solution?

Thank you very much , went to look for.

Good day , guys! Help with the exact dimensions of the shaft crosspiece . Someone writes Pro 82mm х 27mm, and someone 26.97x81.75. Where is right ? Knutkors tgb 11/13/20 med smörjnippel. ArtNr: PRC369

losing his head , hair do not cry I have fuel consumption at 70 km / hour to 1.7 liters of 10 km.

autumn came ... the passengers began to feel cold))). now it is enough to pull the lever and everything in chocolate))). the main thing is not to forget to paint with yellow paint. it's a big secret))). specially put the lever on this place. then do not say that I made it warmer or colder. but I do not say where they should go ...)))

I was not so drastically . I just sealed the axis of the janitors , the corners of the rubber seals windshields , put unnecessary holes in the front and on the floor . To determine these places ,take a garden hose and methodically watering all the suspicious places - everything will fall into place ))). But if this is not done, then the fuse panel under the dash will eventually rust and floor mats will not help ))).

With shipping to Estonia. Please contact via PM or lagri50@mail.ru

Installed ammeter , revolution counter engine , hour meter . The handle with the tailgate moved to the rack - easier to get in the car . It must not be placed on screws ))). Set the PC with the power 220 volts .

Yesterday in the forest suddenly jammed starter ((( , car not to start ,I'm sad the family in panic ... To the nearest farm 12 km ,,, I repaired the starter ))) the house . I had another starter without relay , For him I did reliable emergency mechanical switch )). He will be with me always as a spare . There is no need to run around looking for farm tractor ))) . But now I am looking for retractor relay starter and a flywheel ring (((. Can anyone help?

Understood thanks .

Please tell me, what is the tap for?