Glynn Postad 24 April , 2016 Rapport Share Postad 24 April , 2016 Hi what is the largest anyone has rebored the ed engine? Or has anyone skimmed the block to 5mm shorter than standard? Thanks Citera Länk till kommentar Dela på andra webbplatser More sharing options...
Costin Moga Postad 24 April , 2016 Rapport Share Postad 24 April , 2016 DEL II, pag 5 as I understand (swedish language speakers, pls help!) cylinder diameter standard is 84,14mm, largest possible rebore (repair) 86,17mm Citera Länk till kommentar Dela på andra webbplatser More sharing options...
Glynn Postad 24 April , 2016 Författare Rapport Share Postad 24 April , 2016 Hi costin you said you sleeved yours do you know the diameter inner and outer of the sleeve? Citera Länk till kommentar Dela på andra webbplatser More sharing options...
Costin Moga Postad 24 April , 2016 Rapport Share Postad 24 April , 2016 I have no idea what the thickness of the sleeve was. ID was about standard 84,14mm, different for each piston according to their wear. Basically each piston was measured and 0,05mm added. Citera Länk till kommentar Dela på andra webbplatser More sharing options...
Costin Moga Postad 24 April , 2016 Rapport Share Postad 24 April , 2016 My guess is thickness of the sleeve was 5mm or less... Citera Länk till kommentar Dela på andra webbplatser More sharing options...
KristianEriksson Postad 24 April , 2016 Rapport Share Postad 24 April , 2016 A tips. In this fire pump there might be a Volvo ED engine. Its a auction ending in coupe of days. . http://www.units.se/auction/product/brandspruta-bensindriven/ 1 Citera Länk till kommentar Dela på andra webbplatser More sharing options...
Glynn Postad 24 April , 2016 Författare Rapport Share Postad 24 April , 2016 Thanks kristian I will see if someone can check and buy for me. Citera Länk till kommentar Dela på andra webbplatser More sharing options...
KristianEriksson Postad 27 April , 2016 Rapport Share Postad 27 April , 2016 Anyone here bought it? Citera Länk till kommentar Dela på andra webbplatser More sharing options...
Glynn Postad 27 April , 2016 Författare Rapport Share Postad 27 April , 2016 I didn't I couldn't get someone to look at it for me,and getting it back would be a pain. Citera Länk till kommentar Dela på andra webbplatser More sharing options...
Rekommendera Poster
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.