Taavi14
-
Innehålls Antal
25 -
Gick med
-
Besökte senast
Innehållstyp
Profiler
Articles
Media Demo
Forum
Bloggar
Kalender
Galleri
Filer
Butiken
Forum Inlägg postade av Taavi14
-
-
Still searching for Service and Users manual in English....
-
With shipping to Estonia. Please contact via PM or taavi14@gmail.com
-
I will let you know if all the chapters are scanned.
-
If you speak swedish then I can share swedish version in near future. I will try the scanner at my workplace as my personal one is very slow and scanning would take forever.
-
1
-
-
Hi everybody
Does somebody have information about C202 service handbook in English? I have a Swedish version but I dont speak Swedish so getting information from there takes a lot of time and translation. Btw, I started to digitalise the Swedish manual. Hopefuly it is useful for somebody.
-
2
-
-
​Im looking for Volvo C202 speedometer cable. Used or new, no matter until it is in good condition. I live in Estonia but im ready to pay for shipping.
​taavi14@gmail.com
-
Any news about engine replacement?
-
Please let us know how this modification worked out. 6.17 ratio parts seems to be C202 specific and hard to find.
-
I replaced brake master cylinder with something totally different... Audi A4 B5. It's a tight fit and needs some works but possible to do. Brakes seems to work quite ok. C202 does not have much room under dashboard. I'll try to make some pictures tomorrow.
I found one picture.
-
Maybe it's interesting for someone
https://www.facebook.com/Amphibear
There are some serious problems at the moment but hopefully this project will continue.
-
2
-
-
Just one bearing, not complete set of 4.
-
Hello!
I have for sale 1 wheel bearing for L3314/C202. Price is 40EUR plus shipping to Sweden about 8EUR (without tracking) and 10EUR with tracking. Bearing is made by timken. You can contract me via email taavi14@gmail.com , private message or phone +37253454445 . Sorry I dont speak Swedish. Only English. Bearing is located in Estonia, Ösel.
-
1
-
-
Today I cleaned up car a bit and found out that interiour floor is in bad shape. Probably it needs total replacemant in near future. I also want to replace all body to frame bolts. I managed to remove 6 of them (2 are hidden under double interiour floor). Try to make pics tomorrow.
-
Yesterday I installed 4 new wheel bearings
All bearing are made by Timken. Also added AVM hub locks. New pics next week -
Ignition lock with 2 keys. Bosch 0342006001 and price in Estonia with domestic shipping is 22.12EUR
-
And today I got throttle linkage connected. But its quite old and worn out. I tought that next year I'll gonna replace it with throttle cable. Test drive showed that steering is terrible. Worn out wheel bearing, some freeplay in system and missing steering damper. Hopefully I can install new set of wheel bearings in december.
-
Roof rack and original jack.
Weber carb with new inlet manifold. I also have air filter that fits properly.
And for last new wheel bearing. Last three ones should arrive during this year.
-
Some new pics
-
Hi!
Does anyone have idea, what blank type should I search? I have no key for sample. Only door locks. There is some information about C303 keys but I have one at home and it wont suit (although its quite similar).
-
Yes I got yout spare parts catalogue. Next week I'll try to scan first parts from service manual. I work 200km away from home so I dont have access to the manual every day. I also had the front grille but i must check is it thrown away or not. I also have platform? (dont know whats the correct name) for roof.
-
Indicators are original. L3314 had small ones.
-
I have owned this car for now 10 years. It's 1981 C202. It was shipped directly from Gotland, Sweden to Saaremaa, Estonia about 15 years ago. Former owner was Geab AB as much as I know. I bought it from auction from its first owner in Estonia (Estonian energy). It had a slight engine failure. One lifter was broken. It needed also some bodywork. I have so far installed new swivel bearings and hub seals. Next I'll gonna change front wheel bearings and tie rod ends. It also has mechanical vinch in front and electrical at back. Also original webasto is waiting for its time in garage. Its fully operational. Few weeks ago I got a new inlet manifold with Weber DGEV 32/36 from US. Original carb was just too worn out and I was not interested in rebuilding it. Brake master cylinder and boosters are replace with Audi A4 parts. Front axle uses Landrover wheel cylinders. Brake pads got also new pad material. Sorry if my english is not the best.
Finally some pictures.
PS! I also have C202 original service manual in Swedish. I'll try to scan it but if someone need some particular part, let me know.
-
1
-
Volvo C202Avd 0 (03) Specifikationer C202Volvo C202
i Information, support och hjälp
Postad
Visa fil
Avd 0 (03) Specifikationer C202
Volvo C202 Service handbook. Chapter 0 (03) Specs.