snetok Postad 7 Augusti , 2016 Rapport Share Postad 7 Augusti , 2016 Maybe someone will be useful some ideas. I will be glad. Convenient step and manual throttle cable. Sometimes it lacks a human power that would be pushed cars out of the mud, and there is no one on the gas))). 8 Citera Länk till kommentar Dela på andra webbplatser More sharing options...
snetok Postad 7 Augusti , 2016 Författare Rapport Share Postad 7 Augusti , 2016 Execution of the hook in my version. Boat weight 2.5 tons, the load on the hook 70 kg. 12 Citera Länk till kommentar Dela på andra webbplatser More sharing options...
eile Postad 7 Augusti , 2016 Rapport Share Postad 7 Augusti , 2016 See that type of hook before but police will file you directly here. Citera Länk till kommentar Dela på andra webbplatser More sharing options...
snetok Postad 7 Augusti , 2016 Författare Rapport Share Postad 7 Augusti , 2016 At a minimum, police should understand the features of the military vehicle. I do not think that they have a thorough knowledge of NATO couplings. And who said it was homemade?))) . I got a car right out of the army and it was there together with chains to the wheels. 5 Citera Länk till kommentar Dela på andra webbplatser More sharing options...
Knudsen Postad 8 Augusti , 2016 Rapport Share Postad 8 Augusti , 2016 Den er smart men der vil være sidehvers bevægelse. Det kan afhjælpes med en afstandsholder på hver side af krogen. Hvis ikke krogen er stabil sidevejs så vil det være noget nær et mareridt at køre med tung og lang med den kugle. Mvh Citera Länk till kommentar Dela på andra webbplatser More sharing options...
Johannes Postad 8 Augusti , 2016 Rapport Share Postad 8 Augusti , 2016 Good looking Tgb, Freshly painted? New Wood trims? 😄 Used by Estonian army? Citera Länk till kommentar Dela på andra webbplatser More sharing options...
snetok Postad 8 Augusti , 2016 Författare Rapport Share Postad 8 Augusti , 2016 The plate is drilled with a hook and a hook is inserted with an interference fit. Then scalded on both sides. It is similar to the tractor, which carries the big guns. But if there is any doubt, then of course you need to strengthen the triangular struts. The case itself does not move side - it locks the upper plate, which is firmly inserted into the socket without gaps. The machine of the Estonian Army. When buying, it was worse than hell. There were a lot of fuss, but the body is surprisingly quite rusty. The bars are made of oak, and he impregnated with linseed oil. A paint, forgive me, a Swedish car was taken to the Soviet military equipment USSR times))). By the way it is why - it is believed mat. And forgot to add - step by Defender 2 Citera Länk till kommentar Dela på andra webbplatser More sharing options...
Beau Postad 8 Augusti , 2016 Rapport Share Postad 8 Augusti , 2016 I like your hook and your Defender step. I have a thing that converts a standard 50 mm tow ball to a tow hook so you can tow an army trailer with a ring behind a standard car. That thing I bought many years ago at Ö&B surplus in Göteborg. Picture tomorrow if anyone is interested. 2 Citera Länk till kommentar Dela på andra webbplatser More sharing options...
snetok Postad 8 Augusti , 2016 Författare Rapport Share Postad 8 Augusti , 2016 Thank you for rating . Sometimes it will spread in this topic has something interesting in my opinion. It is a pity that before did not do pictures. 1 Citera Länk till kommentar Dela på andra webbplatser More sharing options...
snetok Postad 19 Augusti , 2016 Författare Rapport Share Postad 19 Augusti , 2016 Sometimes the hole diameter of the nipple for a large when replacing the camera. In this case, the rescue clipped tip of silicone sealant. At the same time it will protect the nipple that he had not cut the Bucs at the wheel. Also, if drawn into the inside of the wheel, a simple device will help the nipple during pumping chamber. One end of it is screwed onto the nipple to the other through the valve is pressurized. The nipple is easy to hold in their hands to complete tire inflation. Note that the thread in both cases special - nipple. 3 Citera Länk till kommentar Dela på andra webbplatser More sharing options...
snetok Postad 24 Augusti , 2016 Författare Rapport Share Postad 24 Augusti , 2016 Very often it is difficult to adjust the carburetor to the correct fuel mixture. In this case, I use a quality indicator mixture. I bought it in Russia. In Russian villages are still many old cars, and when they do not want and expensive. So they invented such a device. Candle with a special glass ,casing and a rotary mirror. Of course in physics, we know that with the right burning - the flame is blue in color. If the orange - it means a rich mixture. If a light-blue, the mixture is too lean. Therefore, we connect the device - and you're done! We turn the adjustment screw of the carburetor and look in the mirror. To be sure, I put two units - 1 and 6 cylinders. Be sure to bring these carburetors in order. Then I do the synchronization. Photos later. Total time adjusting the engine is warm - 2 minutes. Accuracy is very high - examined on the stand - super! The color of the candles on the electrode - the right classic. Fuel consumption at 70 km / hour to 1.7 liters of 10 km. So like the instrument that he bought two more in reserve when the next time was in Russia on business. Just pay attention to the curly washer which presses the valve cover. With their help, I have eliminated the flow of oil from under the bonnet gasket. The pressure on a large area and does not deform cap. Engine dry! 10 Citera Länk till kommentar Dela på andra webbplatser More sharing options...
snetok Postad 26 Augusti , 2016 Författare Rapport Share Postad 26 Augusti , 2016 Sometimes it is not enough nerve to determine where the seam passes. In this case, the tablet - plasticine. To make a bath of clay, pouring water. Then reduce the area - 100 percent hit! It is particularly difficult to determine in the mounting area of a machine gun. But plasticine - solves the problem once and for all. 2 Citera Länk till kommentar Dela på andra webbplatser More sharing options...
snetok Postad 30 Augusti , 2016 Författare Rapport Share Postad 30 Augusti , 2016 When moose eaten toadstools they can pull off in the woods canister. To avoid this - I put the stainless steel lock. Castle bought in a store where they sell things for yachts. 5 Citera Länk till kommentar Dela på andra webbplatser More sharing options...
eile Postad 31 Augusti , 2016 Rapport Share Postad 31 Augusti , 2016 Very often it is difficult to adjust the carburetor to the correct fuel mixture. In this case, I use a quality indicator mixture. I bought it in Russia. In Russian villages are still many old cars, and when they do not want and expensive. So they invented such a device. Candle with a special glass ,casing and a rotary mirror. Of course in physics, we know that with the right burning - the flame is blue in color. If the orange - it means a rich mixture. If a light-blue, the mixture is too lean. Therefore, we connect the device - and you're done! We turn the adjustment screw of the carburetor and look in the mirror. To be sure, I put two units - 1 and 6 cylinders. Be sure to bring these carburetors in order. Then I do the synchronization. Photos later. Total time adjusting the engine is warm - 2 minutes. Accuracy is very high - examined on the stand - super! The color of the candles on the electrode - the right classic. Fuel consumption at 70 km / hour to 1.7 liters of 10 km. So like the instrument that he bought two more in reserve when the next time was in Russia on business. Just pay attention to the curly washer which presses the valve cover. With their help, I have eliminated the flow of oil from under the bonnet gasket. The pressure on a large area and does not deform cap. Engine dry! Interesting tool. Citera Länk till kommentar Dela på andra webbplatser More sharing options...
eile Postad 31 Augusti , 2016 Rapport Share Postad 31 Augusti , 2016 Här är ett enkelt verktyg jag gjorde för lite felsökning, en mutter i en slang med en skruv för gap justering och en annan skruv i änden för jordning, vissa tändsystem har från cdi till spolarna flera hundra volt och mätning på cdi kan vara problematisk och att då istället mäta gnistglappet är en lösning men hängade över en utombordare med tändkabeln i handen kan innebära att man får en kyss så det svartnar för ögonen och man trillar i vattnet. tex ska tunderboltsystem ha spänning översatt till millimeter till ca 6 mm skruven, justeras då enkelt till 6 mm och man ser om laddningen är tillräcklig samt om alla spolar klarar samma gnistlängd. 3 Citera Länk till kommentar Dela på andra webbplatser More sharing options...
snetok Postad 2 September , 2016 Författare Rapport Share Postad 2 September , 2016 Device is notable. Nevertheless, it does not account for the magnitude of the spark gap as a function of compression in the cylinder. In my it is considered on the scale unit. Before viewing the spark - you need to measure compression and put a device arrester .Arrester unlikely to be able to show something else, except for the presence of spark. Then we can judge the health of a candle. ))) 1 Citera Länk till kommentar Dela på andra webbplatser More sharing options...
eile Postad 2 September , 2016 Rapport Share Postad 2 September , 2016 On my simple tool, there its a nut in the hose and adjustment in gap length is made by turning the screw. I had to check if i got same spark from all 4 coils on my boat engine or if spark change if canals on cdi was switch that was the reason i made that tool, i didn't know they exist. Please put up a video when you adjust carburetors with the mirror tool. 2 Citera Länk till kommentar Dela på andra webbplatser More sharing options...
snetok Postad 2 September , 2016 Författare Rapport Share Postad 2 September , 2016 Yes, but I do not know how to insert the video. Citera Länk till kommentar Dela på andra webbplatser More sharing options...
Johannes Postad 3 September , 2016 Rapport Share Postad 3 September , 2016 Upload to youtube and then insert the link. Citera Länk till kommentar Dela på andra webbplatser More sharing options...
snetok Postad 5 September , 2016 Författare Rapport Share Postad 5 September , 2016 I can not . But there is a fallback ))) 1 Citera Länk till kommentar Dela på andra webbplatser More sharing options...
eile Postad 5 September , 2016 Rapport Share Postad 5 September , 2016 thanks, very interesting find this 2 Citera Länk till kommentar Dela på andra webbplatser More sharing options...
snetok Postad 5 September , 2016 Författare Rapport Share Postad 5 September , 2016 Exactly! Citera Länk till kommentar Dela på andra webbplatser More sharing options...
snetok Postad 3 Oktober , 2016 Författare Rapport Share Postad 3 Oktober , 2016 This is the key for the nut of speedometer drive at the transmission . Key size 27 - 12 sides . The tube should be thin walled in order that it can be bent as needed . Cut 10 mm. Drive nut is aluminum , so not much need to pull . They are very comfortable to Unscrew . 5 Citera Länk till kommentar Dela på andra webbplatser More sharing options...
snetok Postad 12 Januari , 2017 Författare Rapport Share Postad 12 Januari , 2017 Very often it is difficult to adjust the carburetor to the correct fuel mixture. In this case, I use a quality indicator mixture. I bought it in Russia. In Russian villages are still many old cars, and when they do not want and expensive. So they invented such a device. Candle with a special glass ,casing and a rotary mirror. Of course in physics, we know that with the right burning - the flame is blue in color. If the orange - it means a rich mixture. If a light-blue, the mixture is too lean. Therefore, we connect the device - and you're done! We turn the adjustment screw of the carburetor and look in the mirror. To be sure, I put two units - 1 and 6 cylinders. Be sure to bring these carburetors in order. Then I do the synchronization. Photos later. Total time adjusting the engine is warm - 2 minutes. Accuracy is very high - examined on the stand - super! The color of the candles on the electrode - the right classic. Fuel consumption at 70 km / hour to 1.7 liters of 10 km. So like the instrument that he bought two more in reserve when the next time was in Russia on business. Just pay attention to the curly washer which presses the valve cover. With their help, I have eliminated the flow of oil from under the bonnet gasket. The pressure on a large area and does not deform cap. Engine dry! Anyone interested in this product , maybe in a personal request . I am now in Russia and have the opportunity to buy them . The estimated price of 50 euros . I'll send them out of Estonia until the spring . . Postage is on the buyer .The number of transports will be limited to the customs service of Russia and Estonia and , therefore, guarantees the execution of the order no . All would be the fact . message 11 and 21 2 Citera Länk till kommentar Dela på andra webbplatser More sharing options...
snetok Postad 13 Januari , 2017 Författare Rapport Share Postad 13 Januari , 2017 Some of the summer improvements . correct Jack with focus the Converter 24 to 12 volt remote battery disconnect switch 4 Citera Länk till kommentar Dela på andra webbplatser More sharing options...
Rekommendera Poster
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.