Gå till innehåll

tyres to valp


Rekommendera Poster

What are good size tyres to valp?

 

I bought a -62 valp, but it have only 32" tyres in original rimms, and those are way too small. Original is about 35", but I liked to have bigger.

 

What are the max size that will fit whitout modification, and what size rim/width/offset?

 

And I have that original B18A, so what are the max size with that engine?

 

Usage will be just light offroad, I'm not going to sink it to swamp or anything like that.

 

Yours,

 

Ismo

Länk till kommentar
Dela på andra webbplatser

I think 35 inches is calculated to hold to those shoulders. yes a little smaller even, 285/85-16 will be a little over 34 inches. You can get in the little bigger 9:00 -16 that works ok. Then it starts to get a bit much for the drive shafts to pull around if it goes heavy.

Länk till kommentar
Dela på andra webbplatser

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Gäst
Svara i detta ämne...

×   Du har klistrat in innehåll med formatering.   Ta bort formatering

  Endast 75 max uttryckssymboler är tillåtna.

×   Din länk har automatiskt bäddats in.   Visa som länk istället

×   Ditt tidigare innehåll har återställts.   Rensa redigerare

×   Du kan inte klistra in bilder direkt. Ladda upp eller sätt in bilder från URL.

Laddar...
×
×
  • Skapa nytt...